Core Advantages
1. Ultra-Wide Aspect Ratio for Long-Format Content
Sized from 28" to 86", with aspect ratios including 16:3.5, 16:4, 32:9, and fully custom configurations. A single ultra-wide display panel covers the full horizontal run - no tiling, no bezels between screens, no content synchronization across units. Standard 16:9 monitors tiled side by side introduce visible seam gaps of 10–20mm per join; a single stretched bar LCD eliminates that entirely.
2. High Brightness - 700 to 3,000 Nits
Standard brightness is 700 nits, suited for indoor environments up to approximately 2,000 lux. High-brightness variants reach 1,500–3,000 nits for shop windows, covered transit platforms, and outdoor kiosks under direct sunlight. Viewing angle is 178°(H)/178°(V), so content stays legible at oblique approach angles without brightness or color shift.
Brightness selection guide:
|
Environment |
Typical Ambient Light |
Recommended Brightness |
|
Indoor (office, corridor, reception) |
200–500 lux |
700 nits |
|
Indoor high-ambient (retail floor, transit concourse) |
500–2,000 lux |
1,000–1,500 nits |
|
Semi-outdoor (covered transit platform, shop window) |
2,000–10,000 lux |
1,500–2,500 nits |
|
Outdoor (direct sunlight exposure) |
10,000–100,000 lux |
2,500–3,000 nits |
3. 24/7 Industrial Reliability
Backlight rated at ≥50,000 hours (approx. 5.7 years continuous). Intelligent thermal management keeps internal operating temperature within spec under full load. Built to IEC 60068 environmental stress standards. These are industrial LCD displays, not commercial-grade panels running outside their rated duty cycle.
4. Slim Profile, Near-Zero Bezel
Bezel width on standard models is under 3mm. In multi-unit shelf-edge or video wall installations, adjacent screens tile with a combined gap below 6mm - well within the threshold where the human eye reads the array as a continuous surface. Relevant for 10-screen transit walls and large-scale shelf bar LCD display rollouts where visual continuity across the full run matters.
5. IP65 Protection Available
Standard units ship at IP40. IP65 (dust-tight, water jet resistant) is available for production floors, outdoor kiosks, vehicle interiors, and washdown environments. Housing is aluminum alloy with anti-glare tempered glass front. Shock-resistant construction meets IEC 60068-2-27 impact test requirements.
6. LED Backlight Power Consumption
Power draw ranges from 30W (28", standard brightness) to 280W (86", high-brightness). LED backlighting runs at lower wattage than equivalent-lumen CCFL panels. For deployment scale and exact per-unit consumption figures, request the model-specific datasheet.
Technical Specifications
|
Parameter |
Specification |
|
Screen Size |
28" / 32" / 37" / 49" / 65" / 75" / 86" (custom dimensions on request) |
|
Aspect Ratio |
16:3.5, 16:4, 16:9.5, 1:3, 1:4, 1:5 and fully custom |
|
Resolution |
1920×360 / 1920×480 / 3840×720 (4K) / customizable |
|
Brightness |
700 nits standard / 1,500–3,000 nits high-brightness option |
|
Contrast Ratio |
1,200:1 – 5,000:1 |
|
Viewing Angle |
178°(H) / 178°(V) |
|
Response Time |
8ms |
|
Backlight Lifespan |
≥50,000 hours |
|
Color Depth |
16.7M (8-bit) |
|
Operating Hours |
24/7 continuous |
|
Power Supply |
AC 100–240V, 50/60Hz |
|
Power Consumption |
30W – 280W (varies by size and brightness) |
|
Interfaces |
HDMI ×1, DisplayPort ×1, VGA, USB, RJ45 (LAN), RS232; Wi-Fi / 4G optional |
|
Operating Temperature |
0°C – 50°C standard; -20°C – 60°C extended range available |
|
Protection Rating |
IP40 standard / IP65 optional |
|
Installation |
Wall mount, ceiling mount, recessed/embedded, floor-standing |
|
Housing |
Aluminum alloy frame + tempered glass |
|
Certifications |
CE, RoHS, FCC, ISO 9001 |
All specifications are configurable. Model-specific datasheets available on request - send your target size, brightness, and interface requirements.
Application Areas
Transportation Hubs
Airport flight information boards, train station departure displays, subway lane guidance, and platform edge strips. Bar-type LCD displays fit above gates, along platform edges, and across station concourses where standard 16:9 screens require awkward tiling. Units are built to handle continuous operation, vibration, and the temperature cycling typical in transit infrastructure.
Retail and Shelf-Edge Signage
Shelf-edge display strips, shop window high-brightness bars, queue-line signage, and aisle content panels. Stretched bar LCD monitors place promotional content at point-of-decision - shelf level, checkout queues, and entrance windows. Content updates remotely via CMS; no print production cycle, no manual swap-out.
Industrial Manufacturing and Warehousing
Production line status monitors, equipment health dashboards, KPI boards, and fault alert displays. IP65-rated industrial display screens handle factory floor conditions - particulate, humidity, and temperature variation - where commercial panels are not rated to operate. Floor managers read line status across multiple zones without walking the floor.
Medical and Command Center Applications
Hospital queue management, patient-call displays, control room data walls, and operational monitoring screens. The elongated format fits above reception desks, along corridor ceilings, and across multi-operator consoles where a standard monitor would either be too tall or require multiple units.
Smart City and Public Safety
Outdoor public information displays, surveillance video walls, and emergency broadcast screens. IP65-rated high-brightness bar display panels maintain readability in rain, dust, and direct sunlight without manual intervention. Operate on 24/7 scheduled content with remote monitoring.
Hospitality and Entertainment
Hotel lobby wayfinding, restaurant digital menu boards, venue activity strips, and gaming floor displays. Content runs on a schedule, updates remotely, and the narrow profile keeps the hardware unobtrusive in designed environments.
Customization Services
Size and Aspect Ratio
Panel dimensions and aspect ratio are adjustable to fit specific installation spaces - 900mm shelf channels, irregular wall recesses, or vehicle interior panels. Provide your target dimensions and we will confirm feasibility and lead time.
Brightness
700 nits to 3,000 nits. Use the brightness selection table above to identify the right tier for your ambient conditions. Specifying higher than necessary increases unit cost and power consumption with no visible benefit indoors.
Interfaces and Connectivity
HDMI, DisplayPort, LAN, Wi-Fi, and 4G/5G modules are available, along with Android or Linux OS integration. Compatible with BrightSign, Scala, and most major CMS platforms. Confirm your CMS at inquiry stage and we will verify compatibility before configuration is locked.
Installation Configuration
Wall-mounted, ceiling-mounted, recessed, portrait orientation, and vehicle-mounted configurations are all supported. Installation drawings and dimensional tolerances provided with every order.
Housing and Surface Finish
Aluminum alloy or stainless steel enclosures. Custom RAL color finishes, silk-print or laser-etched logo marking. Stainless steel is standard for food processing and medical environments requiring washdown resistance.
Content Management and Software
Remote CMS integration, split-zone content layouts, and centralized multi-screen control. For deployments of 50+ units - retail chains, transit operators, corporate campuses - centralized scheduling and device health monitoring are included in the software package.
Why Choose Us
Direct manufacturer since 2003. In-house production across retail, transportation, banking, healthcare, and industrial sectors, with units deployed in 60+ countries. Pricing comes directly from the factory - no trading company margin in the chain.
72-hour burn-in test on every unit. Every unit runs under full operating load for 72 hours before shipment. Test logs are available on request. Units that fail during burn-in are pulled and replaced before the order ships.
Certifications. CE, RoHS, FCC, and ISO 9001 as standard. EN 50155 (railway) and MIL-STD-810G (ruggedized/military) on request for specialized deployments.
Same engineering team from spec to handover. The team that reviews your initial specification handles technical documentation, factory sign-off, and post-delivery support. Response within 24 hours. Documentation in your preferred language.
FAQ
Q: What is the difference between a stretched bar LCD monitor and a regular monitor?
A: Standard monitors use a 16:9 aspect ratio. Stretched bar LCD monitors use elongated ratios - typically 16:3.5 to 16:4 - designed for shelf-edge displays, transit information boards, ticker strips, and other long-format installations. Internally, they use industrial-grade components rated for 24/7 operation, with brightness starting at 700 nits vs. 250–350 nits on a typical office monitor. High-brightness variants reach 3,000 nits for retail and outdoor use.
Q: Is it suitable for outdoor use?
A: Yes, with the correct configuration. Outdoor installations require the high-brightness variant (2,500–3,000 nits depending on sun exposure) plus an IP65-rated enclosure and anti-glare tempered glass. Provide your site's location, orientation, and typical lux levels and we will confirm the specification.
Q: What is the minimum order quantity (MOQ)?
A: Standard catalog models: MOQ is 5–10 units. Custom OEM/ODM configurations: sample orders are available before volume commitment. Send your target specification and we will quote the exact MOQ and lead time.
Q: How do I manage content across multiple screens remotely?
A: All units support LAN and Wi-Fi. Compatible with BrightSign, Scala, and most major CMS platforms. For large networks (100+ endpoints), we provide centralized scheduling, real-time content updates, and device health monitoring. Confirm your CMS platform at inquiry stage - we will verify integration before the order is placed.
Q: Can we test a sample unit before placing a bulk order?
A: Yes. Sample orders are available for most configurations. Test in your actual installation environment with your content and control system - that is the only reliable way to validate performance before volume commitment. Full technical documentation and remote support are provided during evaluation.
Q: What are the lead time and shipping arrangements?
A: Standard orders: 7–15 business days from order confirmation. Shipping via sea, air, or express on DDP, FOB, or CIF terms. For time-sensitive projects, state your required delivery date at inquiry and we will confirm what is achievable before the order is placed.
Q: Can bar LCD displays operate in cold storage or low-temperature environments?
A: Standard units operate from 0°C to 50°C. The extended-range option covers -20°C to 60°C, suited for cold storage, outdoor winter deployments, and high-variation industrial environments. Specify your operating temperature range at inquiry and we will confirm the panel and thermal configuration.
Q: What 4K stretched display options are available?
A: 4K resolution (3840×720) is available in 65", 75", and 86" sizes with aspect ratios of 32:9 and custom configurations. Suitable for high-resolution retail flagship installations, command center data walls, and large-format transit displays. Contact us with your target size and content format for a specific recommendation.
Send your installation dimensions, environment details, and content requirements. We will respond with a specific product configuration and pricing - typically within 24 hours.
Hot Tags: stretched bar lcd monitor, China stretched bar lcd monitor manufacturers, suppliers, factory
